MANUFACTURER OF ALL TYPE PLASTIC PROCESSING MACHINE AND ROT

QUALITY ENHANCEMENT THANKS TO IN-HOUSE STORAGE

 

The production process is optimized considerably thanks to indoor storage. Since Flex-Silos are located in a hall to the same internal climatic, the drying and heating costs will be lower and the quality of the stored material remains consistent.

In contrast, outdoor silos are subjected to weather-induced temperature fluctuations, which frequently cause the formation of condensation and substantial variations in the temperature of stored materials.

 

ADVANTAGES OF THE FLEX-SILOS

 

•             Maximal space utilization, i.e. large storage capacity with a low space requirement

•             Low own weight, which means that no complex foundations are required

•             High rigidity values and load capacities: Sevenfold safety for seams and fabric

•             Optimal flow-out characteristics

•             Accurate selection of fabric according to the requirements of your plastic product

•             No condensation, thus process reliability is increased

•             Can also be assembled in very inaccessible locations

•             Can be quickly dismantled and erected, allowing relocations at any time

•             Can also be fitted with effective discharge equipment

•             Unlike outdoor silos, no separate planning permission or expensive foundations are required. In addition, there is nothing that detracts from the overall visual impression of the company building

QUALITY ENHANCEMENT THANKS TO IN-HOUSE STORAGE

 

The production process is optimized considerably thanks to indoor storage. Since Flex-Silos are located in a hall to the same internal climatic, the drying and heating costs will be lower and the quality of the stored material remains consistent.

In contrast, outdoor silos are subjected to weather-induced temperature fluctuations, which frequently cause the formation of condensation and substantial variations in the temperature of stored materials.

 

ADVANTAGES OF THE FLEX-SILOS

 

•             Maximal space utilization, i.e. large storage capacity with a low space requirement

•             Low own weight, which means that no complex foundations are required

•             High rigidity values and load capacities: Sevenfold safety for seams and fabric

•             Optimal flow-out characteristics

•             Accurate selection of fabric according to the requirements of your plastic product

•             No condensation, thus process reliability is increased

•             Can also be assembled in very inaccessible locations

•             Can be quickly dismantled and erected, allowing relocations at any time

•             Can also be fitted with effective discharge equipment

•             Unlike outdoor silos, no separate planning permission or expensive foundations are required. In addition, there is nothing that detracts from the overall visual impression of the company building

Feature

• Precisely engineered for fast and homogeneous mixing
• Easy to operate
• Control panel with overload motor relay protection
• Three Side Material Discharge (Left, Right, Back)
• Front side inspection window
• Back bottom side cleaning window with safety limit switch
• Timer to stop motor after completion of  batch time
• Safety grill to prevent entering the bag into mixer
• Remixing facility
• Low power consumption compare to gear motor type mixer
• Available in M.S. and S.S. mixer body.
• Mixer with heating also available to dry the outer moisture from granules.

Option

• Rotary level sensor is optional.
• All models optional with the heating function. (Mixing With heating arrangement)

Application

The vertical plastic granules mixer is highly demanded in various industries. With enriched experience and extensive market knowledge we are engaged in delivering a high-quality range of Vertical batch Mixer. Our vertical batch mixer is mainly use to mix the masterbatch and virgin granules and also to mix the virgin and regrind materials homogeneously. Also we are manufacturer of vertical mixer with heater system which use to dry the granules from moisture at outer surface at certain extent along with mixing. Our vertical batch mixer are successfully running in Injection moulding,Blow Mouding,Blown film etc applications.

 

 

Features

·         Precisely engineered for fast and homogeneous mixing

·         Easy to operate

·         Control panel with overload motor relay protection

·         Three Side Material Discharge (Left, Right, Back)

·         Front side inspection window

·         Back bottom side cleaning window with safety limit switch

·         Timer to stop motor after completion of  batch time

·         Safety grill to prevent entering the bag into mixer

·         Remixing facility

·         Low power consumption compare to gear motor type mixer

·         Available in M.S. and S.S. mixer body

·         Mixer with heating also available to dry the outer moisture from granules.

Option

·         Rotary level sensor is optional.

·         All models optional with the heating function. (Mixing With heating arrangement)

Application

The vertical plastic granules mixer is highly demanded in various industries. With enriched experience and extensive market knowledge we are engaged in delivering a high-quality range of Vertical batch Mixer. Our vertical batch mixer is mainly use to mix the masterbatch and virgin granules and also to mix the virgin and regrind materials homogeneously. Also we are manufacturer of vertical mixer with heater system which use to dry the granules from moisture at outer surface at certain extent along with mixing. Our vertical batch mixer are successfully running in Injection moulding,Blow Mouding,Blown film etc applications.

Specifications

Notes: 1) Max. Mixing capacity is tested based on continuous processing.

Material of 0.65kg/L (5.5lb/gal) in bulk density and 2~3mm/0.08~0.12inch in size.

2) Power 3ø, 230 / 400 / 460 / 575VAC, 50 / 60Hz.

We reserve the right to change specifications without prior notice.

 

 

 

          In a High Speed Mixer, the heat generated due to friction if utilized for mixing, hence it’s known as “High Speed Heater Mixer”. High speed mixers are used to mix solid to solid, liquid and pasty components.
          The Seven Star High Speed Heater Cooler Mixer are used in many fields of processing elastomeric or thermo lasts.   
The Mixing container is made of stainless steel. It’s interior has industrial mirror finish. By utilization of frictional heat the material may be agglomerated, dried wanted or hot colored.

 

Ø  Features

·         Perfect height to dia ratio of mixing container pneumaseal / Capsule technology

·         Energy efficient production without cross-contamination and free from moisture.

·         Lowest compounding cost as 0.04 unit per Kg, proving with energy consumption meter in main panel.

·         Mixing tools self-cleaning, adjustable in height specific to the material being mixed.

·         Compact system with the highest specific throughput; 6 to 8 batches / hour with automation.

·         High efficiency even with higher calcium loading.

·         Programmable logic control.

·         Quick, easy dismantling and reassembling.

Ø  Applications
                    Blending Master Batch with the virgin granules  Mixing Pigments or Pigment Paste with granules or polymers powder Blending Pigment and Fillers additives

 

 

 

          In a High Speed Mixer, the heat generated due to friction if utilized for mixing, hence it’s known as “High Speed Heater Mixer”. High speed mixers are used to mix solid to solid, liquid and pasty components.
          The Seven Star High Speed Heater Cooler Mixer are used in many fields of processing elastomeric or thermo lasts.   
The Mixing container is made of stainless steel. It’s interior has industrial mirror finish. By utilization of frictional heat the material may be agglomerated, dried wanted or hot colored.

 

Ø  Features

·         Perfect height to dia ratio of mixing container pneumaseal / Capsule technology

·         Energy efficient production without cross-contamination and free from moisture.

·         Lowest compounding cost as 0.04 unit per Kg, proving with energy consumption meter in main panel.

·         Mixing tools self-cleaning, adjustable in height specific to the material being mixed.

·         Compact system with the highest specific throughput; 6 to 8 batches / hour with automation.

·         High efficiency even with higher calcium loading.

·         Programmable logic control.

·         Quick, easy dismantling and reassembling.

Ø  Applications
                    Blending Master Batch with the virgin granules  Mixing Pigments or Pigment Paste with granules or polymers powder 
Blending Pigment and Fillers additives

 

Ø 

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Providing you the best range of high speed plastic mixer machine, plastic granule vertical mixer, 500 kg vertical mixer manufacturer, 100 kg ss vertical mixer and 500 kg ss vertical mixer with effective & timely delivery.

Leading Manufacturer of materials storage bins, aluminum material storage bin, gi material storage bin, galvanized storage bin manufacturer and stainless steel material storage bin from Ahmedabad.

Features

·         GRA-12,16,20 Series adopts staggered blades, GRA 18, GRA 24 To 44 Series adopts paddle blades.

·         Blades adopt quality steel to ensure high quality and high durability.

·         Staggered blades design can decentralize working load when granulating to increase cutting efficiency and quick blades changing without readjustment.

·         Paddle blades with increase blade inclination design to ensure better cutting effect and lower noise.

·         Equipped with motor overload relay and Safety Limit switch integration with hopper.

·         Easy access to convenient maintenance and cleaning.

·         Compact in size to reduce foot print and castors for easy movement.

·         Total solid base so no need of foundation & feel Less Vibration.

·         Insulated hopper to reduces noise level.

·         Mesh jail can be clear within 5 minutes.

 

Application

GRA 12 To 44 series Of “Standard” granulators are built to Confirm less operating sound and safety configuration and operation security, they are best suitable for plastic recycling of wastes and rejected product from injection, blow molding and extrusion lines Like chairs, battery box, HDPE Drums, barrels, Cans, articles, toys etc. The granulators feature optimal structure, Easy operation and quick blades changing. Staggered rotating blades can easily grab and grind the materials and ensures low energy consumption.

 

Special Screen

Mesh sizes includes Ø6, Ø8, Ø10, Ø12(mm) which are applicable to GRA - 12 To 18 series and Ø12, Ø16, Ø25 (mm) which applicable to GRA - 20 To 44 Series. All can be selected as per customer's requirement.

Table by Catalogues

Notes :

1)   Max. Capacity of the machine is subject to diameter of screen mesh and composition & Properties of the material.

2)  Noise level varies with different materials and motor types.

3)  To avoid plastic from sticking to the blades. All materials should be crushed at normal temperature.

4)  Power Supply : 3ø, 230 / 400 / 460 / 575VAC, 50 / 60Hz.

5)  We reserve the right to change specifications without prior notice.

 

Feeding Hopper with Magnet(Optional)

Feeding hopper with magnet is used to take out metal craps and impurities in the material.

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Prominent & Leading Manufacturer from Ahmedabad, we offer pvc granules mixer machine, 500 kg vertical mixer, 3000 kg ms vertical mixer, 2000 kg vertical mixer manufacturer and 2000 kg vertical mixer.

Features

·         GRA-12,16,20 Series adopts staggered blades, GRA 18, GRA 24 To 44 Series adopts paddle blades.

·         Blades adopt quality steel to ensure high quality and high durability.

·         Staggered blades design can decentralize working load when granulating to increase cutting efficiency and quick blades changing without readjustment.

·         Paddle blades with increase blade inclination design to ensure better cutting effect and lower noise.

·         Equipped with motor overload relay and Safety Limit switch integration with hopper.

·         Easy access to convenient maintenance and cleaning.

·         Compact in size to reduce foot print and castors for easy movement.

·         Total solid base so no need of foundation & feel Less Vibration.

·         Insulated hopper to reduces noise level.

·         Mesh jail can be clear within 5 minutes.

 

Application

GRA 12 To 44 series Of “Standard” granulators are built to Confirm less operating sound and safety configuration and operation security, they are best suitable for plastic recycling of wastes and rejected product from injection, blow molding and extrusion lines Like chairs, battery box, HDPE Drums, barrels, Cans, articles, toys etc. The granulators feature optimal structure, Easy operation and quick blades changing. Staggered rotating blades can easily grab and grind the materials and ensures low energy consumption.

 

Special Screen

Mesh sizes includes Ø6, Ø8, Ø10, Ø12(mm) which are applicable to GRA - 12 To 18 series and Ø12, Ø16, Ø25 (mm) which applicable to GRA - 20 To 44 Series. All can be selected as per customer's requirement.

 

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Features

·         GRA-12,16,20 Series adopts staggered blades, GRA 18, GRA 24 To 44 Series adopts paddle blades.

·         Blades adopt quality steel to ensure high quality and high durability.

·         Staggered blades design can decentralize working load when granulating to increase cutting efficiency and quick blades changing without readjustment.

·         Paddle blades with increase blade inclination design to ensure better cutting effect and lower noise.

·         Equipped with motor overload relay and Safety Limit switch integration with hopper.

·         Easy access to convenient maintenance and cleaning.

·         Compact in size to reduce foot print and castors for easy movement.

·         Total solid base so no need of foundation & feel Less Vibration.

·         Insulated hopper to reduces noise level.

·         Mesh jail can be clear within 5 minutes.

 

Application

GRA 12 To 44 series Of “Standard” granulators are built to Confirm less operating sound and safety configuration and operation security, they are best suitable for plastic recycling of wastes and rejected product from injection, blow molding and extrusion lines Like chairs, battery box, HDPE Drums, barrels, Cans, articles, toys etc. The granulators feature optimal structure, Easy operation and quick blades changing. Staggered rotating blades can easily grab and grind the materials and ensures low energy consumption.

 

Special Screen

Mesh sizes includes Ø6, Ø8, Ø10, Ø12(mm) which are applicable to GRA - 12 To 18 series and Ø12, Ø16, Ø25 (mm) which applicable to GRA - 20 To 44 Series. All can be selected as per customer's requirement.

Table by Catalogues

Notes :

1)   Max. Capacity of the machine is subject to diameter of screen mesh and composition & Properties of the material.

2)  Noise level varies with different materials and motor types.

3)  To avoid plastic from sticking to the blades. All materials should be crushed at normal temperature.

4)  Power Supply : 3ø, 230 / 400 / 460 / 575VAC, 50 / 60Hz.

5)  We reserve the right to change specifications without prior notice.

 

Feeding Hopper with Magnet(Optional)

Feeding hopper with magnet is used to take out metal craps and impurities in the material.

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Pioneers in the industry, we offer automatic vibro sifter, vibro screen machine, semi-automatic vibro screen, vibro screen and vibro seperator from India.

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Manufacturer of a wide range of products which include granules mixer machine, plastic dana vertical mixer machine cum drayer, lldp plastic dana high speed mixer, vertical mixer plastic and high speed plastic granule mixer machine.

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

Pioneers in the industry, we offer roto molding machines, rock and roll roto moulding machine, rock and roll machine and rock n roll roto moulding machine from India.

Pioneers in the industry, we offer vacuum loader, lldp plastic granules vertical mixer, plastic granulaes vertical mixer machine, lldp plastic dana vertical mixer cum drayer and lldp plastic granules vertical mixer cum drayer from India.

 

 

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing. 

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

 

 

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

Mould are the most important part for roto moulding process for creating many kinds of plastic products mostly hollow type.

 

Invoit Plast a rising company manufacturing mould from material like mild steel and stainless steel as per customer's requirement. Roto mould requires skill, standard and accuracy in performance .

 

Invoit Plast is well prepared with computerized designs for mould fabrication work, highly skilled person in sheet metal, welding and polishing works with best machinery.

 

Invoit Plast offers mould  fabricated from graded 2 or 3mm. For customer's approval.  we provide 2D/3D. AutoCAD drawings.

 

Other than mould for water storage tanks and drums Invoit Plast also manufactures mould for Road barriers, Dustbins, Planters, Traffic Cones, Pallet, Ice Box, etc.

 

Threaded Ring

Threading ring for rot moulding mould. Threaded manhole Ring for mould as per customized design and dimension.

 

·        Modular design structure.

·        Reduction in material loss.

·        Better option to minimize dusting.

·        Easy operation and maintenance

·        Design as per custom requirement.

·        Better & consistent product quality due to perfect screening.

·        Better Pollution control

·         Process Optimization

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

Features

·         GRA-12,16,20 Series adopts staggered blades, GRA 18, GRA 24 To 44 Series adopts paddle blades.

·         Blades adopt quality steel to ensure high quality and high durability.

·         Staggered blades design can decentralize working load when granulating to increase cutting efficiency and quick blades changing without readjustment.

·         Paddle blades with increase blade inclination design to ensure better cutting effect and lower noise.

·         Equipped with motor overload relay and Safety Limit switch integration with hopper.

·         Easy access to convenient maintenance and cleaning.

·         Compact in size to reduce foot print and castors for easy movement.

·         Total solid base so no need of foundation & feel Less Vibration.

·         Insulated hopper to reduces noise level.

·         Mesh jail can be clear within 5 minutes.

 

Application

GRA 12 To 44 series Of “Standard” granulators are built to Confirm less operating sound and safety configuration and operation security, they are best suitable for plastic recycling of wastes and rejected product from injection, blow molding and extrusion lines Like chairs, battery box, HDPE Drums, barrels, Cans, articles, toys etc. The granulators feature optimal structure, Easy operation and quick blades changing. Staggered rotating blades can easily grab and grind the materials and ensures low energy consumption.

 

Special Screen

Mesh sizes includes Ø6, Ø8, Ø10, Ø12(mm) which are applicable to GRA - 12 To 18 series and Ø12, Ø16, Ø25 (mm) which applicable to GRA - 20 To 44 Series. All can be selected as per customer's requirement.

Table by Catalogues

Notes :

1)   Max. Capacity of the machine is subject to diameter of screen mesh and composition & Properties of the material.

2)  Noise level varies with different materials and motor types.

3)  To avoid plastic from sticking to the blades. All materials should be crushed at normal temperature.

4)  Power Supply : 3ø, 230 / 400 / 460 / 575VAC, 50 / 60Hz.

5)  We reserve the right to change specifications without prior notice.

 

Feeding Hopper with Magnet(Optional)

Feeding hopper with magnet is used to take out metal craps and impurities in the material.

With expansion and constant needs of quality powder of PLASTIC, RUBBER and OTHER MINERALS., Pulverizing process has become an initial stage of plastic products manufacturing industries.asd

asdasdasdasdasdasdsdasdaacadfasdasdasdasdasdasda

We INVOIT PLAST MACHINERY PVT LTD as manufacturer of all kind of machinery related to plastic product industries, offers  Pulveriser machine with modern technology to meet the demands of customers. These pulverisers are useful for materials of High & Low density materials such as LDPE, LLDPE, HDPE, PC, PS, PET, PVC and ABS etc.

 

For pulverising granulated particles we have developed a uniquely designed Pulveriser with certain processing principals. Granulated raw materials is feeded into the grinders called Mill to draw the raw material a suction system is provided, different screening system is provided to get required powder mesh.,rough particles  from the

screen is refeeded in to the grinders(mill) through closed-loop process and the powder is collected with blower cyclone system. The finished products are collected into the ags.

 

The pulveriser we offer are provided with a special sensor and control for pressure, temperature and power consump_on register to enable round the clock operation.

 

Safe & Compact Machine

Design

Mill Body :

For visual check of the disc gap two inspection windows are provided in

both side of the mill body. water cooling system is provided to prevent access heat inside of the mill body as well as to the stationary disc. temperature for long life of the disc. Water cooling system is also

provide for bearing housing.

Mill Door :

Water Cooling System is Provide into mill door Which Maintain Stationary disc temperature which will gives the batter life of disc

 

Metal Detector:

To detect metal inclusion particle from polymers a high efficiency hopper magnet is provided with the machine.

 

Feeder:

Low level indicator provided for feeding hopper. Auto tripping system in case of access temperature in material output and/or motor

overload. Temperature sensor is provided at the end of mill body. Temperature of Mill body goes higher, at that time machine will stop due to sense of temperature sensor

 

Disc:

Special graded and tested alloy steel is used for disc which passes through special hardening process.

 

Silent Features:

·       Space Saving Design

·       Easy Maintenance

·       Low Energy Consump_on

·       Minimum Man Power To Operate

·       Dust Free Opera_on

·       Economical And Cost Effective.

·       Available With Auto & Manual Mode For Ease To Operate

Offering you a complete choice of products which include material storage bin, materials storage bins, ms material storage bin and material storage bin supplier.

Manufacturer of a wide range of products which include biaxial rotomoulding machine and extruder machine.

Leading Manufacturer of plastic extruder machine from Ahmedabad.

Our product range includes a wide range of dust removal system.

Leading Manufacturer of blades for plastic grinder machine from Ahmedabad.

Our range of products include pressure conveying system.

Leading Manufacturer of plastic dana mixer machine cum drayer from Ahmedabad.